Installing a water pump to get 100% performance

Installing a water pump for 100% performance : Once you've selected a water pump, it's not just the pump itself that's important. Connecting the pump for use is equally important. Proper connection ensures maximum water pressure and efficiency. Therefore, this article will provide recommendations on what to do and what not to do when installing a water pump for 100% effective water pressure.

Reducing or bending pipes directly affects pump efficiency. In addition to proper pipe connections, careful planning can also improve pump efficiency.

Installing a water pump to get 100% performance

For almost every type of pump, the inlet and outlet pipes should be minimized and water pressure friction reduced to ensure the pump Installing a water pump to get 100% performance.

"Don't shorten or bend pipes."

We should avoid shortening or bending pipes within 30-45 centimeters (from the pump's connection point to the water pipe) as this will affect the efficiency of the pump's inlet and outlet water delivery.

"Know the pump's specifications."

We should research the specific type of pump, including its specifications, to ensure it meets our needs and avoids unnecessary waste.

Water pump sepcification

From the nameplate that tells the water pump specs as above, let's look at the main information first: how much water the water pump can supply and how. You will see that Q= 30-100 liters/minute. The numbers in the range of 30-100 liters will vary according to the distance of use, which is in the range of 33-16 meters and the furthest distance is 36 meters (vertical). In this section, it would be very good to look at the graph of that water pump as well. To read the graph, click.

For installing a water pump to get 100% water pressure

Calculating water reserves for use is equally important, which is choosing the right size water tank for use. Selecting the right pump and water tank for use can save you more than half of your expenses. Click.

When we don't have enough water reserves to meet our water usage, the water may dry up or become insufficient, which can negatively impact the water pump. If the water pump doesn't have an automatic shut-off system, the motor will run constantly, potentially burning out the motor. If the water pump does have an automatic shut-off system, air will enter the pump, resulting in inconsistent water suction. You'll need to bleed the air because the pressure won't be consistent, resulting in an inconsistent water supply. The process of bleed-out the air is quite complicated, so it's better to prevent it now than to fix it later.

There is also a "BY PASS" installation method, which is very important because when the electricity goes out and the pump breaks, we will still be able to use water as normal. To connect a water pump in the By Pass method, click.

 Again!! Here are some important things we need to know and consider to ensure your water pump operates at its highest efficiency and delivers 100% water pressure.

1. Understand your water pump's specifications thoroughly.

2. Calculate the water reserves appropriately for your water pump.

3. Avoid shortening or bending pipes within 30-45 centimeters to reduce obstructions and reduce water pressure friction within the pipe.

This way, our water pump will work at 100% efficiency, including saving energy and costs.

For more information

Tel. 02-292-1067-70

Youtube : Leopump ประเทศไทย

Line Official : @775ruust

Facebook : LEOpumpThailand 

TikTok : Leopumpthailand

Find Dealers : https://www.leo.co.th/dealer